...
Košarica
0

LYRA Delos

1.790,00 

Stereo zvučnica, output 0,6 mV, MC, Namiki boron stylus, napredni materijali i konstrukcija.

SKU: lyra-delos Kategorija: Oznaka:

Designer: Jonathan Carr
Builder: Yoshinori Mishima (final build, testing), Akiko Ishiyama (primary build)
Type: Medium weight, medium compliance, low-impedance moving coil cartridge
Stylus: Namiki microridge line-contact nude diamond stylus (2.5um x 75um), surface-mounted
Cantilever system: Solid boron rod with short one-point wire suspension, directly mounted into cartridge body
Body: Anodized aluminum
Coils: 3-layer deep, 6N high-purity copper, square-shaped permalloy former, 6.3ohm self-impedance, 9.5uH inductance
Output voltage: 0.6mV@5cm/sec., zero to peak, 45 degrees (CBS test record, other test records may alter results)
Frequency range: 10Hz ~ 50kHz
Channel separation: Greater than 30dB at 1kHz
Compliance: Approx. 12 x 10cm/dyne at 100Hz
Cartridge mounting screws: 2.6mm 0.45 pitch JIS standard
Distance from mounting holes to stylus tip: 9.5mm
Cartridge weight (without stylus cover): 7.3g
Tracking force: 1.65g – 1.75g (1.72g recommended)
Recommended load directly into MC phono input: 97.6ohm ~ 806ohm (detailed guidelines in instruction manual, finalize by listening)
Recommended load via step-up transformer: Use a step-up transformer designed for 5 – 10 ohms cartridge impedance (step-up transformer’s output must be connected to 10kohm ~ 47kohm MM-level RIAA input, preferably via short, low-capacitance cable)
Recommended tonearms: Medium to Medium-High mass arms recommended, which is bulk of tonearm market

Kategorije

Gramofoni

Proizvođač

Lyra

Vrsta Ponude

Novo

Recenzije

Još nema recenzija.

Budite prvi koji će recenzirati “LYRA Delos”

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)

Naziv
E-pošta
Telefon
Enquiry
© MediaAudio d.o.o 2024, All rights reserved.
Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.